Best Sellers

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £5.60
3 = £15.99
10 = £48.99

6mm x 1m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

1st Quality Ripstop Nylon

Please contact us for colours swatches.

Roll width 153cm..

Mirai Ripstop Nylon 48g/m² - 1st quality, crisp, light weight cloth at aproximately 153cm wide, suitable for general purpose and high spec applications. Mirai is the choice of the famous Peter Lynn Kites and has had many years of astounding success All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a peice of cloth measuring 100cm x 153cm

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £8.40
3 = £23.99
10 = £74.99

6mm x 1.5m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

Did you know : We quite possibly have the single most untidy office / workshop and mail order picking room in the entire world! We tend to blame the dog but really, we're as bad as he is! Never the less we still manage to design and produce some really interesting light weight structures that usually we're not allowed to know what they're for!