Best Sellers

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £5.60
3 = £15.99
10 = £48.99

6mm x 1m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

1st Quality Ripstop Nylon

Please contact us for colours swatches.

Roll width 153cm..

Mirai Ripstop Nylon 48g/m² - 1st quality, crisp, light weight cloth at aproximately 153cm wide, suitable for general purpose and high spec applications. Mirai is the choice of the famous Peter Lynn Kites and has had many years of astounding success All cloth is measured per meter pulled off the roll, so 1m of purchased fabric will buy a peice of cloth measuring 100cm x 153cm

Value Pack Available!

High quality epoxy resin pultruded Carbon Fibre

Carbon Fibre Tube in a range from 4 to 12mm outsite diameter, larger sizes available on request. Standard lengths 1m and 1.5m Our Carbon Fibre Tube comes in either a pultruded construction, pultruded is a stiff carbon that maintains a degree of flex.

The primary advantage of using carbon tubes for a project, vs. fiberglass or metal, is its high stiffness to weight ratio. Carbon fibre is stiff and very lightweight, making it ideal for rigid frame construction. There is a degree of flexibility to the carbon depending on diameter (small diameter has a lot more flex than large diameter tube)

Pultruded carbon tube, also known as graphite rods or unidirectional carbon fiber tube, are used in many industrial applications and aerospace designs, as well as in hobbies such as RC airplanes and RC sailboats, dual line kites and single line kites, and just about anywhere else you want a stiff, strong rod.

Cutting Carbon - We recommend the easiest and most cost effective way to cut carbon is with a fine tooth junior hacksaw... wrap the carbon with tape, and score the whole circumference with the blade before cutting all the way through. Also wearing eye protection and a dust mask for safety is a good idea!

Price Break Down

1 = £8.40
3 = £23.99
10 = £74.99

6mm x 1.5m

Please Note: We can not send carbon greater than 1.5m in length by the normal postal service. If you require lengths of greater than 1.5m, please phone the shop for alternative options and pricing.

Ozone Imp III Quattro

The Highwaymen eShop | Power Kites | Quad Line Power Kites | Ozone | Ozone Imp III Quattro

Ozone Imp III Quattro

Whatever your age or kiting ambitions, Ozone's Imp range has the perfect power kite to get you started in the most exciting new sport on the planet. Following the tremendous success with the original Imp, Ozone's designers re-worked it to produce three Imp products: the Imp III Classic, the Imp III Trainer and the Imp III Quattro. All the kites in the range have incredible stability, direct handling and fly perfectly across a wide wind window in light or strong winds.

The four line control set-up makes the Quattro the most manoeuvrable of the Imp range and is perfect as a first quad line power kite, or for more experienced fliers demanding the legendary Ozone quality of design and manufacturing at a low price. With a high level of stability, and smooth, easy control characteristics, the Imp Quattro is ready to go with the lines attached, is easy to fly, and can be used to learn to buggy, mountain board or snow kite.

For 2009, the Imp range follows the stunning sail layout of the Flows, and De-Power kites. Available in four sizes: the smaller sizes being ideal for younger fliers, newcomers to quad line kiting, and stronger winds. The larger sizes generate more pull and are ideal for lighter winds or more experienced fliers.

All Ozone kites are manufactured in Ozone's factory in Vietnam and built to the same exacting standards for which their World-class paragliders and technical power kites are world-renowned. Quality and durability are pushed to the highest level with all materials chosen for longevity and performance. We order all Ozone products direct from the factory, which means that prices are kept to the absolute minimum for you.

Includes: Kite, 18m x 180kg Dyneema flying lines, quad handles with kite killers, stuff sack, manual & sticker.

Warning: The larger sizes pull hard in strong winds. Always read the manual before use.

Don't forget, give us a call to see what our best price is!

The Highwaymen eShop > Power Kites > Quad Line Power Kites > Ozone > Ozone Imp III Quattro

Product Sections

Store Information

Best Sellers

Ozone Imp III Quattro

Ozone Imp III Quattro

Imp Quattro (Grey/White/Green)- 1.0sq.m.

Price: £82.98 (Including VAT at 20%)

Imp Quattro (Grey/Orange/Red)- 1.5sq.m.

Price: £89.99 (Including VAT at 20%)

Imp Quattro (Grey/White/Orange) - 2.5sq.m.

Price: £112.98 (Including VAT at 20%)

Imp Quattro (Grey/White/Blue) - 3.5sq.m.

Price: £134.99 (Including VAT at 20%)